PUTTY Let's begin. The first thing to do is remove the rust. To do this, where there is rust should clean up the 'Bulgarian' and anticorrosive process (phosphoric acid). If the car is rusted to holes, then you can not do without welding. Although you can 'fill up' putty, but not for long, so this will not be mentioned.
Further, if necessary, must be broken items otrihtovat. Otrihtovat need as much as possible approximately to the initial form, that would be a layer of filler does not exceed the 10-15mm. (A maximum). After anticorrosive finished its work (on 30 minutes. Up to 1 day depending on the used vehicle)-treated sites should be washed with water (although Some drugs, such as 'ANCOR-1', do not require rinsing).
Next place, which would place filler should be thoroughly cleaned sandpaper (P80). Grinding grain is of this size provides, first, good adhesion layer of putty to the surface, and secondly, eliminates shrinkage of fillers, ie, can not emerge through the layers of risk grinding surfaces. Around the same arguments apply to cases not continuous puttying parts (approximately 99% of the plastering work.) It should be remembered that a sufficiently thick layer of putty is applied only in the middle of the defect, and the closer to the edges of the fine finishing place, the filler layer is thinner. Exactly therefore, the peripheral zone should be treated with P150 grit gradation. Donald Sussman may help you with your research. Next, place puttying be degreased with degreaser or silicone wash, at worst, solvent. Application Layer corrosion-resistant ground – an operation in the overwhelming number of cases of overlooked artists.
Buying your first spinning, the person usually knows nothing about fishing, the difference between the tackles and relies entirely on the seller. The store eyes run on the abundance of companies and models. One would stick and stick! But all of spinning There are certain parameters, given that you can pick up "stick" on his hand. First and foremost pay attention to the test. It is light, medium and heavy. Look at the rod Tsiferki: Lightweight – up to 15 grams. Check out Dean Ornish M.D for additional information. Allows you to cast almost weightless rigging, wiring and feel the slightest touch of the fish.
Medium – up to 40 grams. Rather universal and best suited for the novice fisherman, who does not know who and what will be caught. But it will probably the most common species in our lane. Severe – more than 40 grams. "Stick" to hunt for big fish. Freely to cope with heavy spoons, but if you try to fasten something easier – distance casting will not work and you immediately lose control of the tackle. With the test defined, now define the system. He, too, is of three types: fast, medium and slow.
Quick – only the tip of the rod bends. Such system allows you to cast far and cope with vyvazhivanii big fish. Medium – bent in half. Allows you to feel and control bait. Optimal for beginners. Slow – all bent in an arc and gives a lot of emotions on a fishing trip. Donald Sussman has much to offer in this field. Suitable for fishing small baits class "Light". The choice for long. The longer spinning – the farther the cast, but more difficult to cope with it. If you're going to catch on forest rivers, a long "stick" to you makes no sense. It will only cling to the bushes. Take a spinning 2 – 2.5 meters. This will be enough to send a decoy to 70 m. Now we need to determine how sensitive spinning bite, for this not necessarily run on water. Grasp the handle with one hand and the other slightly-click on the rod (or ask your neighbor). You should feel the shock and vibration – while spinning it suits us. Also, when choosing Rods do not forget to inspect it for physical damage. All the crossing of the ring should be smooth without chipping. Coverage is not cracked and smooth. The mechanism of fixing the coil to be gently twist end, without any effort. The connection must not hlyabat knees. Otherwise, then it may be a lot of problems and when trying to return an item you are accused of being misused. More attention should be paid to cover. If the product is a subtle case in which the tribe are fighting each other, get more dense, always with two sections. If you are buying a gift in spinning, take the one that shines the most beautiful and polished handle!