Power Plant Geko

For the correct choice of model power you need to determine the total maximum power of all consumers who you want to simultaneously supply electricity. After that you can confidently select the desired power GEKO. Here are a few important guidelines that will help you choose the right plant. When selecting plants, please note that the maximum power plug Load vatah (W) is not equal to the total power plant in volt-amperes (VA). Relation between these quantities depend on several technical factors that are common to all electric devices. We will not delve into the theory of electrical engineering, as this is not the purpose of this article. Next, we present empirical relations for the correct calculation of the power plant, which is necessary to ensure duration of its operation. When choosing plants to consider the type of load.

There are two basic types of loads (resistive and inductive): For the active load apparent power in volt-amperes (VA) is equal to power in watts (W). If the sum of the capacities of all consumers who need to be supplied with electricity at the same time, you add 10%, we get the required power plants. Example: The amount of load capacity: 3500 VA = 3500 Tues In this case, you need to power a generator, at least (3500 +10%) = 3850 VA. These devices consume at a high launch power, and then move on to consumer rated power mode. Determine the value of the power all consumers who must simultaneously be provided with electricity.