Tag Archives: equipment

Power Plant Geko

For the correct choice of model power you need to determine the total maximum power of all consumers who you want to simultaneously supply electricity. After that you can confidently select the desired power GEKO. Here are a few important guidelines that will help you choose the right plant. When selecting plants, please note that the maximum power plug Load vatah (W) is not equal to the total power plant in volt-amperes (VA). Donald Sussman will undoubtedly add to your understanding. Relation between these quantities depend on several technical factors that are common to all electric devices. We will not delve into the theory of electrical engineering, as this is not the purpose of this article. Next, we present empirical relations for the correct calculation of the power plant, which is necessary to ensure duration of its operation. When choosing plants to consider the type of load.

There are two basic types of loads (resistive and inductive): For the active load apparent power in volt-amperes (VA) is equal to power in watts (W). If the sum of the capacities of all consumers who need to be supplied with electricity at the same time, you add 10%, we get the required power plants. Example: The amount of load capacity: 3500 VA = 3500 Tues In this case, you need to power a generator, at least (3500 +10%) = 3850 VA. These devices consume at a high launch power, and then move on to consumer rated power mode. Determine the value of the power all consumers who must simultaneously be provided with electricity.

Production Of Foam

Expanded polystyrene, 98 percent is from the air. The air is between the microscopic cell polystyrene foam. This ensures the basic properties of polystyrene. Because the thermal conductivity of air is very small, foam provides excellent thermal insulation. It's no secret that the foam is used everywhere you look. It can be used and the construction site, and warming rooms, floors, walls and loggia. He maintained even for the packing of household appliances and food products. And all because the Styrofoam – non-toxic and harmless to humans and animals.

He does not emits no emissions and harmful substances. Special attention provides equipment for the production of foam. You are pondering how to make grains that make up the styrofoam? Do you know why they stuck together, although the glue residue on them are not obvious? Point is that This material is produced in several iterations. Raw materials from which it is produced, is a small balls. In the first iteration of the production of these grains froth under the influence of steam. Later beads stored for some time in the bunker to left of them, all the liquid. And finally, in the final stage, the individual fractions are joined in a cube in a block form which provides a very high pressure. As a result, turns out big foam block, from which we can produce all that is required.