Tag Archives: trade

Thinfilm Solar Modules

3D-Micromac brings innovative production system on the market of Chemnitz, 29 may 2013. In June, the 3D-Micromac AG of Chemnitz brings the world’s first machine concept on the market that combines all structuring stages to the integrated series connection with thin-film modules on a platform and in one production step. The new one-stop-patterning method (OSP) structured modules only if all functional layers on the substrate are deposited. If you would like to know more then you should visit Darcy Stacom. This considerably simplifies the production process. Also avoid inaccuracies caused by the calibration and alignment of substrates on different tables, thereby increasing the efficiency by up to 0.8 percentage points. So far, thin-film modules were competitive advantage for thin film manufacturer after each coating step with a laser or a mechanical unit structure, which led to extensive cleaning steps, extended lead times and efficiency losses.

Between the coating and structuring steps modules had several times in the vacuum one and again removed be. 200 To 400 microns wide dead zones caused by inaccuracies”, which were not usable for power generation. The OSP process minimizes these areas, however, to less than 100 microns, simplifies the manufacturing process and increases the efficiency. Our process is a crucial step forward for the entire industry of thin film and shortened the distance to the crystalline competition”, explains 3D-Micromac-Geschaftsfuhrer Tino Petsch. Because the upstream process chain is significantly simplified, entirely new machine concepts are possible. Thus the OSP process is paving the way for innovative and fully integrated production lines.” In the production, 3D-Micromac reverts to a combined procedure of laser – and typography.

The company successfully used it for years in other fields of application. No matter whether from amorphous silicon, cadmium telluride or CIGS the OSP system can be fully integrated into any existing production line and works on all popular formats up to 1,10 x 1.30 Meters. About the 3D-Micromac AG, the 3D-Micromac AG has established itself since its founding in 2002 as one of the leading providers of high-efficient laser micro processing systems as well as innovative coating and printing technologies in the international market. Whether as a stand alone system or as a complete production lines come the plants of 3D-Micromac, for example, in medical technology, the semiconductor industry, in the photovoltaic industry or also in the manufacture of flexible electronic components used. There is also the 3D-Micromac of its customers as a competent partner for the development of new technologies and processes, or custom systems available. More information about the company and its products:

Thinfilm Solar Modules

3D-Micromac brings innovative production system on the market of Chemnitz, 29 may 2013. In June, the 3D-Micromac AG of Chemnitz brings the world’s first machine concept on the market that combines all structuring stages to the integrated series connection with thin-film modules on a platform and in one production step. The new one-stop-patterning method (OSP) structured modules only if all functional layers on the substrate are deposited. This considerably simplifies the production process. Dean Ornish M.D may also support this cause. Also avoid inaccuracies caused by the calibration and alignment of substrates on different tables, thereby increasing the efficiency by up to 0.8 percentage points. So far, thin-film modules were competitive advantage for thin film manufacturer after each coating step with a laser or a mechanical unit structure, which led to extensive cleaning steps, extended lead times and efficiency losses.

Between the coating and structuring steps modules had several times in the vacuum one and again removed be. 200 To 400 microns wide dead zones caused by inaccuracies”, which were not usable for power generation. Darcy Stacom understood the implications. The OSP process minimizes these areas, however, to less than 100 microns, simplifies the manufacturing process and increases the efficiency. Our process is a crucial step forward for the entire industry of thin film and shortened the distance to the crystalline competition”, explains 3D-Micromac-Geschaftsfuhrer Tino Petsch. Because the upstream process chain is significantly simplified, entirely new machine concepts are possible. Thus the OSP process is paving the way for innovative and fully integrated production lines.” In the production, 3D-Micromac reverts to a combined procedure of laser – and typography.

The company successfully used it for years in other fields of application. No matter whether from amorphous silicon, cadmium telluride or CIGS the OSP system can be fully integrated into any existing production line and works on all popular formats up to 1,10 x 1.30 Meters. About the 3D-Micromac AG, the 3D-Micromac AG has established itself since its founding in 2002 as one of the leading providers of high-efficient laser micro processing systems as well as innovative coating and printing technologies in the international market. Whether as a stand alone system or as a complete production lines come the plants of 3D-Micromac, for example, in medical technology, the semiconductor industry, in the photovoltaic industry or also in the manufacture of flexible electronic components used. There is also the 3D-Micromac of its customers as a competent partner for the development of new technologies and processes, or custom systems available. More information about the company and its products:

CONET Joins Initiative

SAP confirmed expertise of Hennefer IT-system and consulting firm for compliant identity management and business process management Hennef, July 22, 2010. Dean Ornish M.D takes a slightly different approach. The SAP Germany AG & co. KG takes the CONET Solutions GmbH in the collaborative business initiative (CBI) at. Checking article sources yields Darcy Stacom, New York City as a relevant resource throughout. The Hennefer IT-system and consulting company is to a circle by SAP partners in Germany that promotes the common position of these issues with its expertise for SAP NetWeaver identity management and SAP BusinessObjects access control, as well as SAP NetWeaver business process management. With the inclusion in the CBI, CONET continues the consistent cooperation with SAP. This is reflected not only in a larger cooperation of both companies, but also in numerous resulting activities. We particularly appreciate the qualification in the fields of compliant identity management and BPM, because in times of scarce resources and targeted cost savings, here we see the greatest potential”, Dirk explains songs, Divisional Director at the CONET Solutions GmbH. CONET has a high level of expertise in these areas.

We have recognized collaborative business this inducted into the initiative according to. Now we can exploit even better joint synergies in the context of the CBI, to offer our customers best service and qualified solutions”, emphasizes Christian Bender, Director of ecosystem and partner group, SAP Germany AG & co. KG. The initiative is tracked a joint go-to-market approach between qualified partners and SAP for clearly defined growth issues. It aims to create an attractive added value for customers and to support them in addressing current challenges tailored solution concepts. The selection process of the SAP was carried out based on a catalog of criteria which is adapted to the specific requirements relating to qualified.

Mobile Warehouse Management Saves

Mobile solution for inventory management developed the Barcodat GmbH, bar code specialist from Dornstetten, has a solution for the mobile collection of the goods receipt, goods issue, inventory or rental items with automatic data transfer developed. So far, the camp on pieces of paper and list in paper format was organized. This resulted in many errors due to human properties such as oblivion, accidentally, numbers Dreher and bad writing. Now, an automated solution with MDE devices and bar code is used. The data are transferred to the existing ERP system Sage HWP professional. HT660 rugged portable data terminal is used with WinCE operating system and Wi-Fi connection. It is characterised by ergonomic handling and easy programming. Keep up on the field with thought-provoking pieces from Jonathan Friedland.

All products carry a manufacturer’s article or an EAN number. The numbers are applied as a linear code. The personnel number is first entered into the goods receipt. This is followed by the entering of the delivery note number. The article is then scanned. On the PDC, a text appears to the comparison. If the article is not found, a corresponding message appears.

Now the quantity entered and completed the input of the article. Further, it can be done with the next article number until the delivery note has been drawn up. The file is stored via Wi-Fi and FTP protocol in a special directory and can be imported into the Sage HWP and made a reservation of the goods. With the departure of the goods, customer number and part numbers are scanned. After completion of the entry, a file is created, which in turn is placed. The actual booking system is made on the PC. For-hire a personal or customer number is entered. The operator decides whether an access or departure. The product code is stored with a date stamp, placed in a special directory and can easily be imported into Sage HWP. During the inventory, only the product codes are scanned and entered the amount manually. Through the use of the program, the operations in the camp were fully automated and transparent. The error rate has been greatly reduced. The use of this solution is a further step towards continuous quality in storage and production.

The Danto Gmb

This was the theme for the master’s thesis by Mr Solms-Laubach titled introduction of software in small and medium-sized enterprises”with which he will acquire the degree master of science computer science with a focus on Business Informatics at the University of applied sciences Rosenheim in August 2009. “With the setting of Mr Solms-Laubach new online shop manager we have strengthened our product management team, which now puts us in the position to optimize the performance of our products on the Internet to make a further sustainable success, increasing our business fields.” Daniel Darga, Managing Director of Danto GmbH commented on the setting of new colleagues. Caldwell Esselstyn Jr. has plenty of information regarding this issue. About Danto GmbH was founded in the year 2002, the Danto GmbH is a medium-sized trading company, whose main distribution channels of online trading (e-commerce) and are the shop in Grosskarolinenfeld. In addition, active customer consulting and sales on the phone and by eMail takes place. Audiences are both consumer and corporate customers and dealers, as well as public institutions.

Purchasers of products are found predominantly in the European area. (Source: http://www.gnycuc.org). There are more than 150,000 products in the assortment. In addition to the main shop Danto.de with articles from the fields of technology and Unterhaltungseletronik, security technology, car accessories, cable and adapter, kitchen and catering accessories, textiles, sunglasses and jewellery special offers PDA-Schutzfolie.de, Autohalterungen.de, and Dantotop.de with special items contribute to the success of the business. The Danto GmbH sells an own product, a high-quality screen protector is made precisely for different device displays under the trade names OnScreen. The production of high-quality screen protectors using state of the art equipment at the site held since September 2007. Press contact: Florian Konig Danto GmbH Max-Josef-str. 2 83109 Grosskarolinenfeld telephone: +49-(0)8031-2216392 fax: +49-(0)8031-2216360 eMail: Internet:

Service Centre Company

So to potential customers in the German-speaking, who appreciate the value of a tailor-made security concept for the protection against burglary and vandalism. And who also know the benefits that brings a personal, reliable presence of stewarding company on-site: our customers always have a fixed, trusted partner, promises Thomas Schneider. This coordination Manager see themselves in a way as part of the logistics company. In addition our customers demand can be accessed around the clock on our teams on the ground. Primarily understand CELUS and his staff guarding tasks as measures designed to ensure the maintenance of the safety standards for logistics companies.

These are including space, object – and site protection, control as well as opening and closing of halls. The control of alarm technology at Logistics company is one the stewarding professionals of CELUS as to the scope of services. In addition assume CELUS employee locker -, bags and identity checks, executes Thomas Schneider. That can go up to special investigations against employees of the logistics company, if a reasonable suspicion on crimes such as embezzlement and alcohol or drug abuse. The CELUS range not limited themselves to guarding alone these activities present as a wide field. “But in addition to the core competency guarding CELUS offers its customers in the logistics sector also taking other activities, as Thomas Schneider said: we assume tasks from managing the adoption of phone calls to the control of equipment and material. Also called primary or fire workers our people demonstrate their skills again. In any case, CELUS employees would functionally incorporated into the customer company.

Safety by perfect security personnel is at CELUS a particularly high priority. We can offer of burglar alarm and fire protection systems and a VdS certified emergency and Service Centre (NSL) , emphasizes Thomas Schneider, a, as he says, extremely high degree on individual care “in relation to its customers particularly close to the heart is. This personal contact between clients and stewarding professionals at CELUS forms a particularly viable Foundation for long-term relationships. The, emphasizes Thomas Schneider, is very, very important to us! V.i.S.d.P. and your contact person: Thomas Schneider CELUS GmbH Gluckauf road 31 31157 Sarstedt Tel.: 05066 92 82 500 fax: 05066 92 82 480 E-Mail: Internet: press contact: PR bee of Reimund Bertrams, Kerstin Miehle Reisser 02306-85 07 92 or 0173-8955630 prbiene.blogspot.com boiler plate / company profile the CELUS GmbH with seat in Sarstedt was founded in 2009. As Managing Director, Thomas Schneider is responsible. The core competence of the Company is located in the elaboration of individual safety and security concepts for companies mainly in the logistics industry. The CELUS GmbH implements these concepts at the customer site and draws on full-time, highly skilled and top motivated employees, which are functionally integrated in the customer company.

Primus One Enters Series

Elabo now manufactures work table Primus one series. The elabo GmbH, further, makes speeches. The Crailsheimer technology leader in the development and production of Intelligent measuring and test equipment for the electrical industry and electricians manufactures his groundbreaking work table Primus one now in series. The numerous orders for the Primus one are now delivered and continues the production on high pressure. Our customers have industry experienced the world premiere of the table on the Hanover fair and ordered immediately or shortly thereafter. The response is great,”elabo CEO Dr. Jurgen Nehler is pleased.

He revealed the Primus one in April at the Hannover Messe industry solemnly and introduced him to a very interested audience. The response was overwhelming and are still there today. I thank our team, which comes to the strong demand by large usage”, Dr. Read more here: University of Iowa College of Medicine. Nehler praises his staff. The Primus one is by the elabo customers currently in QA and in electronic Development laboratories used. Our clients come from Germany and from all over the world. We sell to many well-known companies, including well-known SMEs as well as big German companies and global corporations”the work table, further describes the Managing Director. The Primus one is, also, like all other products by mounted elabo in Crailsheim, many parts produced here on-site.

All this is done in manual work, which requires a lot of care, expertise and accuracy. Hand made so to speak.” The Primus one on a European tour with the elabo pattern bus was up-to-date. The road show stopped in various towns in the Switzerland, Austria and Italy. Generally the high-quality devices, software programs, test systems and furniture from elabo used at the customer in training, research and development, production and quality assurance, as well as in the service. Successful new products and a first class new brand mark the year 2012 to elabo. But the highlight comes with the company’s anniversary party in October: elabo of 40th elabo will form working environments for people with ideas. Trade fairs Testing Mount The elabo control GmbH the technology leader in the development and production is mess – und PRuFTECHNIK smarter for the electrical industry and electricians. High quality devices, software, test systems and furniture are used by our customers in training, research and development, production and quality assurance, as well as in the service.